This topic contains 0 replies, has 1 voice, and was last updated by odlskwx 6 years, 5 months ago.
-
AuthorPosts
-
May 2, 2019 at 4:23 am #94951
.
.LDG BALUN MANUAL >> DOWNLOAD NOW
LDG BALUN MANUAL >> READ ONLINE
.
.
.
.
.
.
.
.
.
.LDG pioneered the automatic, wide-range switched-L tuner in 1995. From its laboratories near the nation’s capitol, LDG continues to define the state of the art in this field with innovative automatic tuners and related products for every amateur need. Jumpstart, or “Real Hams Don’t Read Manuals!”
Does not include original manual. The LDG AT-200 You can also use the AT-200 with longwires, random wires and antennas fed with ladder line with the optional LDG RBA 4:1 balun. The AT-200 features over 16,000 3D memories, automatically storing tuning data for frequencies and bands as you use
The LDG RT-100MK2 is a 100 W automatic antenna tuner for split installation. The tuner can be installed directly at the antenna and is supplied with power via the coaxial cable. The tuner is designed for unbalanced antennas and has beside the two PL jacks for input and output, an additional screw for connecting an ground wire.
The LDG AT-100Pro is the next step in the evolution of the automatic tuner. It will match dipoles, verticals, inverted-Vees or virtually any coax-fed antenna. With an optional LDG balun, you can also use longwires or antennas fed with ladder-line.
Yaesu radio’s are among the best, and LDG makes a dedicated bolt-on tuner for the FT-897, but that leaves a big chunk of the Yaesu product line with no dedicated tuner. Of course, most LDG tuners will work just fine with Yaesu radios, butn it sure would be nice to have it integrated to the radio.nn LDG’s new YT-100 is just that.
The LDG RBA 4:1 4:1 balun is designed to allow easy interface of ladder line antennas and long wires to the LDG line of Automatic Antenna Tuners. The Balun operates “stand alone”, thus does not require an LDG Tuner.
AT-600PRO OPERATIONS MANUAL MANUAL REV A PAGE 1 LDG AT-600Pro 600W Automatic Antenna Tuner LDG Electronics 1445 Parran Road St. Leonard MD 20685-2903 USA 6 to 3200 ohms with optional 4:1 balun. • LED bargraph displays power level, SWR, and status.
The AT-100ProII uses
Fx-115 es plus manual
Tormek supergrind 1200 manualidades
863
Asko w8844xl manual
Dct2224 motorola manual pdf -
AuthorPosts
You must be logged in to reply to this topic.