This topic contains 0 replies, has 1 voice, and was last updated by 
-
Posts
-
.
.MAXETHERM 400 MANUAL >> DOWNLOAD NOW
MAXETHERM 400 MANUAL >> READ ONLINE
.
.
.
.
.
.
.
.
.
.Learn what’s going on if your heater displays the EO5 error code on a Pentair Maxetherm pool/spa heater. I am currently troubleshooting my heater and hit a stuck point. I have a Pentair Max-E-Therm 400 installed approximately April 2012. My pool is an in-ground gunite with attached spa (total approx 30,000 gallons). When I turn on the heater using either the spa or pool selection, the service system light turns on and nothing else happens.
I have a sta-rite maxitherm 400 natural gas. replaced the ignition control board earlier this year because the old one must have over heated some way and the plastic cover on it melted. since then the unit will ignite for a second and the go out.
Find great deals on eBay for max e therm 400. Shop with confidence.
Sta-Rite Max-E-Therm Heater Parts – Electrical System parts, includes igniters, control boards, modules, high limits, thermistors, etc.
in this manual applies to all Max-E-Therm models. READ AND REVIEW THIS MANUAL COMPLETELY, it is very important that the owner/installer read and understand the section covering installation instructions, and recognize the local and state codes before installing the Max-E-Therm. Its use will reduce service calls and chance of injury and will
6 MAX-E-THERM® Pool and Spa Heater Installation and User’s Guide P/N S794 Rev. F 5-19-13 SAFETY INFORMATION Section 1. Introduction The Max-E-Therm® pool heaters are designed and manufactured to provide many years of safe and reliable service when installed, operated and maintained according to the information in this manual.
User’s Guide for Optional accessories. Operational manual for Bobbin Work Kit. (Optional accessory: SABWRK1)
Pentair 42001-0096S Control BD Kit (HD Series)This Control is no longer Available, you will be shipped the factory replacement. The replacement will not work if you use a remote control system.
I just replaced the Thermistor on my Sta-Rite Max-E-Therm 400 heater because the water temperature on the contro
You must be logged in to reply to this topic.