This topic contains 0 replies, has 1 voice, and was last updated by 
-
Posts
-
.
.Notifier verifire tools programming manualtryndamere counter >> Download / Read Online
.
.
.
.
.
.
.
.
.
.This allows the program to be entered with independent per-point segments, while the NFS-320 simultaneously monitors other (already installed) points for alarm conditions. VeriFire® Tools is an offline programming and test utility that can greatly reduce installation programming time, and increase con-fidence in the site-specific software.
This allows the program to be entered with independent per-point segments, while the NFS-320 simultaneously monitors other (already installed) points for alarm conditions. VeriFire® Tools is an offline programming and test utility that can greatly reduce installation programming time, and increase con-fidence in the site-specific software.
• Field-programmable on panel or on PC with VeriFire® Tools program check, compare, simulate. • Full QWERTY keypad. • Battery charger supports 18 – 200 AH batteries. • Non-alarm points for lower priority functions. • Remote ACK/Signal Silence/System Reset/Drill via monitor modules.
Programming. The UDACT-2 programming is created and downloaded using. VeriFire Tools. This enables the unit to be programmed prior to. installation, be easily modified, and saved either online or. offline. A printed report with point or zone information can be. generated from VeriFire Tools for an ONYX Series panel or net-work annunciator.
NFS2-3030 (left) and NFS2-3030 with DVC audio option (right) 7070covg.jpg General The NFS2-3030 is an intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS2-3030 is ideally suited for these appli-cations. Programming of the system will include all levels of authorization [Basic and Alter Status functions], as well as training of basic networking programming principles. Program training of the systems will be accomplished both on a live training system and through the use of the current off-line programming tool – VeriFire Tools.
? ??? ? ? ? ?
You must be logged in to reply to this topic.