This topic contains 0 replies, has 1 voice, and was last updated by 
-
Posts
-
Download >> Download Chico mixing instructions
Read Online >> Read Online Chico mixing instructions
chico a3
sealing compound for electrical
electrical conduit sealing compoundcrouse hinds chico
chico a19px
chico sealing compound removal
chico a05 sealing compound
eys fitting installation instructions
Follow these instructions carefully: Use a CLEAN mixing vessel for every batch. Particles of previous batches or dirt may spoil the seal. The recommended proportions are, by VOLUME– 2 parts of Chico A compound to 1 part of clean water. Do not mix more than can be poured in 15 minutes after water is added.What are the mixing instructions for CHICO A sealing compound. water is added. Use cold water. Warm water increases speed of setting.
25 Aug 2014
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF 1365. CHICO® A . If large quantities of this product are mixed with sufficient quantities of water
Important: Please read these instructions carefully before installing or DIRECTIONS FOR INSTALLATION. 1. Use Killark type “SC”; Crouse-Hinds type “CHICO”,. “CHICO A” Hinds and Appleton compounds, read and follow the mixing.
2 Apr 2015 COMPOUND/CHICO A3/. CHICO Mixture of 65997-16-2, 26499-65-0, 65997-15-1, and 14808-60-7 Obtain special instructions before use.
Shake the sealing cement thoroughly in all directions. Mix sealing cement with correct proportion of clean water as noted below. CEMENT. Add one (1) part water to two (2) parts cement by volume.
Chico A-P (5 pouches per carton) – provides 25 and 55 cubic inches of The mixed sealing compound is poured directly into the sealing fitting. – no funnel
You must be logged in to reply to this topic.