This topic contains 0 replies, has 1 voice, and was last updated by 
-
Posts
-
.
.S3 ANTMINER MANUAL >> DOWNLOAD NOW
S3 ANTMINER MANUAL >> READ ONLINE
.
.
.
.
.
.
.
.
.
.Dogiecoin – Bitmain Antminer S3 Setup Guide. 1) Pow ? e ? ri ? ? ng ? ? ? ? ? S3’s do not come with a power supply, and you will need a typical computer PSU with 4xPCI-E 6 pin power connectors Strictly only 2 PCI-E connectors are required at stock speeds, however it will reduce cable temperatures by utilising all 4.
S4+ Server Manual Last updated: 4/22/2015 Page 3 of 10 Page 3 / 10 1 Overview Bitmain is introducing the newest server: the S4+ server. More powerful and efficient than its predecessor, the S4+ packs quite a punch. It uses the state of the art BM1382 chip powered by ultra-low power 28nm technology, with 2570Gh/s hash rate.
Antminer S3 is the first 28nm bitcoin miner. In this tutorial, we will introduce the setting-up for Antminer S3(441GH @ 340w) bitcoin miner. This tutorial is also suitable for Antminer S3+ and Antminer S3++. The Bitmain Antminer S3 Bitcoin ASIC Miner is their next step in the evolution of their ASIC chips as well as going back to the basics with the blade design that started it all. There are some changes that have been made along the way though. First is the cowled dual fan enclosure that the S3 has is a new twist on the first-blade design.
AntMiner Manual Last updated: 12/31/2014 Page 7 of 10 Page 7 / 10 Worker- This is your worker ID on the selected pool. Password- This is the password for your selected worker. Comment: 4.1.1 The AntMiner S5 can be set up on three mining pools, with decreasing priority from the first pool (pool 1) to third the pool (pool 3).
Bitcoin mining hardware designer Bitmain has released the AntMiner S3, the latest member of its AntMiner family based on 28nm silicon. The AntMiner S3 claims to deliver up to 478GH/s while
Antminer has realized this issue, thus for Antminer S4 and S5, they adopted cubieboard, and the firmware is loaded in the SD card on the cubieboard which avoids the awkward situation like S3. So, simply by replacing the SD card, you are able to update the firmware. Hope our answe
You must be logged in to reply to this topic.